The sizes listed are external dimensions, measured across the outside of the sink body. For an undermount install, your cabinet opening and countertop cutout are what matter, so measure the inside width of your base cabinet first and allow clearance on both sides for the mounting brackets and sealant.

A 13 x 13 suits a bar or prep station. 16 x 16 and 17 x 17 are the common bathroom and secondary-sink sizes. 19 x 19 and 21 x 21 are kitchen sizes. If you are between two, send us your cabinet width at [email protected] and we will tell you which one fits.

The full size guide PDF is linked above with every dimension laid out.

Both. The same sink mounts under the counter for a seamless edge, or drops in from above resting on the rim.

Undermount is the cleaner look and the easier one to wipe into, but it needs a stone, solid-surface, or sealed countertop and a fabricator-cut hole. Drop-in works on any counter including laminate and is the simpler retrofit. Decide before your counter is cut, because the cutout differs between the two.

It fits standard US drain assemblies, so a drain from any local plumbing supplier will thread in.

The Sink + PushUp Button bundle includes the matching brass drain so the finish is identical to the basin, which a chrome or black drain from a hardware store will not be. The Sink + PushUp + S-trap bundle adds the visible trap, which matters when the plumbing sits in an open vanity where people can see it.

If your plumbing is hidden behind a cabinet door, sink only is fine.

Yes, entirely your choice. It arrives polished and bright. With no lacquer on the surface, brass reacts with air and water and begins to deepen within the first weeks, settling into warm browns where it is touched least.

To keep it bright: polish with any brass cream and it returns close to new. Do this monthly for a consistent shine, or leave it alone and let the patina build. Unlike a lacquered sink, where the coating eventually chips and cannot be repaired, you can reverse the look at any point for the life of the sink.

Patina is normal ageing, not a defect, and is excluded from the warranty for that reason.

This is exactly what the hammered surface is for. A smooth polished basin shows every mark. The hand-struck texture breaks up reflections, so scratches, water spots, and the small marks of daily use disappear into the pattern instead of sitting on top of it.

Brass is also solid through its full thickness, so a deep scratch can be polished out rather than exposing a different metal underneath, which is what happens with plated or coated sinks.

Warm water, mild soap, soft cloth, and dry it after use. Drying is the single habit that matters most, because standing water is what leaves spots.

Never use: bleach, oven cleaner, drain chemicals left to sit in the basin, abrasive pads, or limescale remover. These attack brass unevenly and leave permanent pale patches that polishing will not fully even out.

Acidic foods such as lemon, tomato, and vinegar will lighten the spot they sit on. Rinse them away rather than leaving them in the basin overnight.

Yes. Solid brass handles boiling water and hot cookware without warping, discolouring, or releasing anything into the basin. There is no coating or resin to blister.

Very hot contact may locally accelerate the patina in that spot, which blends back as the rest of the sink ages.

This listing is solid brass. We work in both metals in our Marrakech workshop, and some of our customer stories feature copper pieces, which is where the confusion comes from.

Brass is the warmer gold tone that patinas toward deep honey and brown. Copper is pinker and ages toward darker browns and reds. If you want this exact sink in copper instead, email us and we will quote it.

Yes. Every sink is made to order, so the listed sizes are just our most requested ones. We regularly build custom dimensions, different depths, round and rectangular shapes, and aged or polished finishes instead of the bright unlacquered default.

Send your measurements or a sketch to [email protected] before ordering. Customs are quoted individually and we confirm everything in writing before production starts.

Return it unused in its original packaging within 15 days for a refund. Unpack and check it against your cutout the day it arrives, because once a sink has been installed or sealed in it cannot be returned. Please check our refund policy

Visual damage from transit should be reported within 15 days with photos and your order number. Beyond that, a 5-year warranty covers manufacturing defects in construction and materials.

Send us your cabinet width, your countertop material, or a photo of the space. We will tell you which size fits and whether undermount or drop-in is the better call for your setup, before you spend anything.

Email [email protected] and someone from the workshop will reply.